Unless You Know you have damage
And Point Out Any Hail Damage
Dont File a Hale Damage Claim!
We Will Meet With Your Your Insurance Adjuster
Free Hail damage Inspection


How long do roof replacements take?

It depends on the convergence of a number of factors including size of the job, type of materials, delivery schedules and delays, weather conditions, and roofing project schedules. Even on a modest-sized house and favorable scheduling and weather conditions, expect the roofing project to take several days. When you choose us as your Austin roofing contractor, we're committed to keeping your informed as to the status of your project.

How much do you charge for a typical Austin roof replacement?

Again, it depends. Factors that influence the price include size, design, material type, material quality, and more. Fortunately, we offer a free onsite consultation where we can evaluate your project and provide you with a written estimate.

Is there anything I can do about the mildew covering my roof tiles?

Yes, mildew cleaning solutions do exist that are safe for cleaning roof tiles. You'll need a portable sprayer too. Both are available at hardware stores. As always, be careful whenever you venture onto your roof. Cleaning solutions may be slippery.

How do rain gutters damage roofs?

Rain gutters don't damage roofs – clogged rain gutters do. Whether the rain gutter is clogged with debris or snow and ice, water can backup into these "dams" and enter the home by either dripping down into the siding or being forced beneath the roof tiles and the roof deck.

How can I tell if my roof should be replaced?

Roofs that need to be replaced often have one or more of the following symptoms:

  • Missing shingles/tiles
  • Cracked shingles/tiles
  • Heavily damaged shingles/tiles
  • Decay
  • Roof leaks
  • Interior water damage
  • High energy bills

How can I repair a wooden shingle?

First, you'll need a "shingle ripper" tool. Use the shingle ripper to cut the nails securing the shingle you want to replace and remove it. Next, place the replacement shingle where the original shingle was, but keep the new shingle sticking out by about a quarter of an inch (compared to the neighboring shingles. Nail the shingle to the roof deck with the nails going just below the overlapping shingle. Using a hammer and a block of wood, hammer the butt end of the shingle, forcing it under the overlapping shingle and into alignment with its neighbors.

How can I replace a roof tile?

Remove the damaged tile. You should be able to gently lift the tiles just above and then slide the new tile into place. Depending on the type of tile used, you should see a batten that the new tile hooks over. If not, you may need to use nails to secure the new tile in place.

How can I repair an asphalt shingle?

If you have shingles that are peeling, curled up, or torn, you can use roofing cement to fix them. After applying the roofing cement, use nails to keep the shingle secure while the cement dries. You can easily replace missing asphalt shingles by cutting roofing material to the proper size and positioning and nailing it beneath the overlapping row.